FILTER CONTROL VALVES

 

Fleck Control Valves
 
  FLECK 5600  - Mechanical Residential Control Valve
 
Features
  • Simple mechanical design is easy to understand and operate.
  • Two valve body designs: one for downflow regeneration and one for upflow regeneration.
  • (covers every valve in the 5600 family - quick access to all internal components)
  • Injector/drain modules containing the brine valve, flow controls and injector are removable from the valve's exterior.
  • Ruggedly built timer is designed with heavy-duty 3/8" wide plastic gears.
  • 5600 controls are user friendly and easy to program.
  • Non-corrosive, UV-resistant fiber-reinforced polymer valve body.
  • Choice of 7 or 12 day clock or demand regeneration with either mechanical or electronic meter.
  • Economical - small annual power consumption; keeps the time and activates the piston/valve mechanics
  • with a single motor.
  • Designed with double backwash cycle facility.

Options
  • Bypass valve (fiber-reinforced polymer or lead-free brass)
  • Backwash filter
  • Upflow regeneration
  • 35 day timer
  • Low water use piston (uses as little as 29 gallons or 109 litres/regeneration)
  • Meter initiated regeneration
 
  FLECK 2850  - 1.5" Commercial Control Valve
 
Features
  • Fully adjustable 5-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse.
  • Timed brine refill and downflow service.
  • Reliable hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration.
  • Solid lead-free brass valve body for superior strength and durability.
  • Backwash capacity handles tanks up to 30" diameter.
  • 1-1/2" top mount control valve ideal for smaller size commercial/industrial applications.
  • Consistent brining regardless of salt levels with timed brine refills.
  • Choice of 7 or 12 day clock, manual or meter.
  • Continuous flow rate of 51 GPM (193lpm) with a backwash of 49 GPM (185lpm).
  • Ideal for larger volume filtration applications
Options
  • Meter initiated regeneration
  • Backwash filter
  • No hard water bypass piston (for water softener applications)
  • Environmental cover for external installations
  • Electronic timer, ET or Systemax
  • Hot water version available (conrollers:time clock 180°F 82°C or metered valve 150°F 65°C )
  • Manual operation
  • Service valve operator
  • Auxiliary switch
  • Side mount
 
     
  FLECK 2900  - 2" Commercial Control Valve
 
Features
  • Incorporates 2 high reliablity hydraulically balanced pistons to independently pilot service flow and regeneration
  • Allows high performance and versatility to commercial/industrial applications
  • For use with the single or multiple tank systems
  • Backwashes softener tanks up to 36" diameter
  • Continuous flow rate of 106 GPM (400 lpm)
  • Available with 7 or 12 day timer or meter to control regeneration
  • Lead-free brass valve body for superior strength and durability
  • No hard water bypass piston
Option
  • Backwash filter
  • Meter initiated regeneration
  • No hard water bypass piston
  • Electronic timer
  • Service valve operator
  • Auxiliary switches
  • Hot water version with timer control for downflow operation only - 180°F, +80°C)
  • Manual operation
  • Environmental cover
  • Upflow regeneration
  • Side mount
  • Treated water regeneration
   
Clack Filter Control Valves
 
  CLACK WS1-TC  - 1" Automatic Timer Control Valve
 
Features
  • Backwash and brining ability to suit up to 22" diameter tanks
  • Solid state microprocessor with easy access front control panel settings
  • Counter-current backwash feature offers efficiency, optimum regeneration and cleaning ability
  • Adjustable regeneration frequency, standard is 1-99 days with a 7-day timer optional
  • Downflow regeneration
  • 10 selectable pre-programmed regeneration cycles
  • The valve inbuilt memory stores system configuration and operation data in nonvolatile memory
  • 12-volt output AC Adapter provides safe and easy installation
  • Control valve design provides optimum service and backwash rates
  • Treated water regenerant refill
  • Reliable and proven DC drive
     
  CLACK WS1-CI  - 1" Automatic Volumetric Control Valve
 
Features
  • Solid state microprocessor with easy access front control panel settings
  • Mutiple operational modes; meter immediate, meter delayed, or time clock delayed
  • Program in ppm, French degrees, German degrees, or cubic meters
  • Fully programmable regeneration cycle sequence (maximum 9)
  • Programmable regeneration cycle times
  • Days override feature; 1-28 days available
  • Backwash and brining ability to suit up to 22" diameter tanks
  • Downflow / upflow regeneration choice
  • The controller stores system configuration and operation data in nonvolatile memory
  • Capacitor back-up with up to 2 hour power carry over
  • 12-volt output AC Adapter provides safe and easy installation
  • Control valve design provides optimum service and backwash rates
  • Treated water regenerant refill
  • Mixing valve option available
  • Low salt alarm
  • 24-hour clock
  • Reliable and proven DC drive
Manual Control Valves
H-F56F Top Mounted
 
H-F56D Side Mounted
Applications
These manual control valves are suitable form installation in water softeners, carbon filters, Iron removal filters, Deionisation systems and any media filtration applications where automation is not required. Such applications may include aquarium and aquaculture filtration, swimming pools, horticulture, hydroponics and waste water recycling applications.
Product Features
These filtration systems have a small footprint and this type of valve is simple to operate, all filtration positions are clearly marked as well as the current service position of the valve. The simple design of the valve provides for rapid open and close action, long service life with a simple design to provide good sealing to allow for on-line operation at up to 100psi (8 Bar). These H-F56 valve series are made with corrosion resistant materials, and provide high flow rates, with efficient backwashing efficiency and minimum cycle times.
H-F56F Top Mounted   H-F56D Side Mounted
Working  Pressure ≦0.8MPa
Working Temperature +1 to +80℃
Max. Flow Rate 4,500 litres/hr
Tank Diameter Ø150~Ø300 (6"~12")
Threads Base 2.5"~8" NPSM
In/Out 1" FBSP
Drain 1" FBSP
Riser tube 1.05" OD
 
Working Pressure ≦0.8MPa
Working Temperature +1 to +80℃
Max. Flow Rate 10,000 litres/hr
Tank Diameter Ø550~Ø600 (10"~24")
Threads Base 2.5"~8" NPSM
In/Out 2" FBSP
Drain 2" FBSP
Riser tube 1.5"D-GB
Top&Bottom 2"
Flow Diagram   Flow Diagram
 
     
     

 

© Copyright 2013 Water Engineering Technologies